design refer to en61347-2-13,iec61347-2-13,ul8750 %% % % % % % % % % % universal ac input / full range(up to 295vac)built in active pfc compliance to en61000-3-2 class c constant voltage design high efficiency up to 93% protections: short circuit / overload / over voltage / over temperature cooling by free air convection half encapsulated u-bracket low profile:33mm zvs technology to reduce power dissipation suitable for built-in type led applications 3 years warranty 215*67.4*33mm (l*w*h) 150w 150w 151.2w 153.6w rated power 151.2w 11.0~13.2v 13.5~16.5v 21.6~26.4v 43.2~52.8v voltage adj. range 32.4~39.6v 130~185% rated output power specification model dc voltage rated current output line regulation load regulation setup, rise time hold up time (typ.) voltage range note.4 frequency range power factor (typ.) efficiency (typ.) input inrush current (typ.) leakage current over temperature safety standards working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload over voltage ac current (typ.) 2000ms, 100ms/230vac 3000ms, 100ms/115vac at full load 90 ~ 295vac 127 ~ 417vdc 47 ~ 63hz 2a/115vac 1a/230vac 0.7a/277vac cold start 65a/230vac <0.75ma / 277vac 13.6 ~ 16.3v 17 ~ 21v 26.7 ~ 32.4v 53 ~ 64.8v protection type : hiccup mode, recovers automatically after fault co ndition is removed protection type : shut down o/p voltage with auto-recovery or re-power on t o recovery 95 5 ! ! (rth2) protection type : shut down o/p voltage, recovers automatically afte r temperature goes down compliance to en55015, en61000-3-2 class c( 60% load),en61000-3- 3 -30 ~ +70 (refer to "derating curve") ! 20 ~ 90% rh non-condensing -40 ~ +85 , 10 ~ 95% rh ! ! !) 0.03%/ (0 ~ 60 10 ~ 500hz, 5g 10min./1cycle, 60min. each along x, y, z axes 216.3k hrs min. mil-hdbk-217f (25 ) ! 91.5% pf 0.98/115vac pf>0.96/230vac pf 0.94/277vac at full load > > 16ms/230vac 16ms/115vac at full load 91.5% 93% 93% 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 2.0% 2.0% 2.0% 2.0% 100mvp-p 150mvp-p 150mvp-p 250mvp-p 12v 12.5a 0 ~ 12.5a 15v 10a 0 ~ 10a 24v 6.3a 0 ~ 6.3a 48v 3.2a 0 ~ 3.2a ulp-150-12 ulp-150-15 ulp-150-24 ulp-150-48 file name:ulp-150-spec 2011-08-11 # features : u l p - 1 5 0 s e r i e s ripple & noise (max.) note.2 voltage tolerance note.3 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. derating may be needed under low input voltages. please check the static c haracteristics for more details. 5. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still mee ts emc directives. 6. please remove the component d1 before conducted hipot test. ! environment safety & emc (note 5) protection withstand voltage note.6 isolation resistance i/p-o/p:3.75kvac i/p-fg:1.88kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms/500vdc/ 70%rh 25 / ! current range 41.4 ~ 48.6v 93% 1.0% 0.5% 2.0% 250mvp-p 36v 4.2a 0 ~ 4.2a ulp-150-36 150w u-bracket single output with pfc function compliance to en61000-4-2,3,4,5,6,8,11; en61547, en55024, lig ht industry level (surge 4kv), criteria a short circuit protection type : hiccup mode, recovers automatically after fault co ndition is removed 0.67kg; 24pcs/17.5kg/0.65cuft emc immunity emc emission
pwm circuit detection o.l.p. emi filter apfc power switch- filter & synchronous +v i/p fg ing converter o.v.p. bridge rectifiers -v block diagram mechanical specification case no. 988 unit:mm o.t.p. u l p - 1 5 0 s e r i e s ac terminal pin no. assignment dc terminal pin no. assignment pin no. pin no. 1 1 3 2 2 assignment assignment fg v- ac/n v- ac/l 150w u-bracket single output with pfc function file name:ulp-150-spec 2011-08-11 controller rectifiers 34 v+ v+ derating curve static characteristics ambient temperature ( ) ! load (%) -30 0 10 20 30 40 50 60 65 70 20 40 60 80 100 (horizontal) 130 55 45 mount with a 300*500*2mm heatsink input voltage (v) 60hz 90 100 110 135 155 230 295 100 90 80 70 60 50 40 load(%) 100vac 230vac 4.5 4pl 3.5 4pl 194 208 6.5 7.62 6.2 + 215 52 62.7 201 211 67.4 33 1 2 3 1 2 3 4 7.5 3.5 3.5 7.62 6.2 terminal t31-c032033702 deca terminal t31-c032043702 deca
|
